100% new PP pladtic, the service life is up to 10 years.
Less consumption, nearly 1 degree an hour
Beautiful plastic appearance with dust filter
Adopt centrifugal blower, low noise high efficiency
Adopt 100mm 5090 cooling pad, the cooling capacity is strong
Set ventilation, ventilation, dust, smell reduction, cooling in one
Evaporative Air Coolers are an environmentally-friendly and cost-friendly cooling option for your home. Much like a breeze flowing across a lake or the refreshing cool air you feel near a waterfall, air coolers produce a comfortable, cool breeze with the natural process of water evaporation. When warm air is drawn into the Evaporative Cooler, it is filtered through a wet honeycomb cooling medium, which absorbs heat and naturally cools and humidifies the air. A powerful fan pushes the cool air out of the front of the unit into the surrounding area. This no-compressor system cools naturally, efficiently and inexpensively.
Evaporative Air Coolers are more effective in areas with maximum relative humidity of 60% or less. Warm, dry air is important for more effective evaporative cooling and the temperature decrease will be greater in drier environments because higher evaporation occurs when the humidity is low. Evaporative Air Coolers produce moisture and can be used to increase humidification in a room. They are ideal for maintaining a cool breeze and increase comfort in homes located in drier regions.
Centrifugal Air Cooler Specification:
Centrifugal Air Cooler Configuration:
Casing: modified PP plastics adopted, high strength, not easy deformation, anti-ultraviolet ray and ageing resistance.
Blower fan: novel wind blades adopted, sufficient air quantity, high pressure, and effective noise inhibition.
Centrifugal wind wheel: super-silent, high hydrostatic pressure, blowing further.
Motor: full aluminum casing adopted, good appearance, light weight, quick heat dissipation, high efficiency, dust and moisture prevention, high quality dual sealed bearings equipped, and high safety and maintenance free.
Cooling pad: imported paper adopted, good water absorption, high evaporation efficiency, specially formulated glue, greenness and environmental protection, good viscosity, no degumming even being soaked all the year around, and a long service life.
Water pump: a permanent magnetism footed pump, high efficiency, and overcoming the defect of easy damage caused by water deficiency, idling and scaling.
Dust net :With an outside dust screen, this can be easily removed and cleaned.
FAQ:
Q1: Are you the trading company or manufacturer?
A1: WE are the professional evaporative air cooler manufacturer. Have been in this industry for more than 10 years.
We design the air cooler model, make the air cooler mould, produce the air cooler parts all by ourselves.
Q2: Can you offer me better price?
A2: we have many type air cooler, you can choose which you need. Different Configuration price will be different.
Q3: Can you make specific voltage and thickness of cooling pad, and use our own brand?
A3: We can offer 110V-120V, 220V-240V, 380V-415V., frequency 50HZ-60HZ. Cooling pad always we use is 10mm, if you need 12mm, we also can make for you. Brand and air cooler, we can make OEM for you.
Q4: What is the payment term?
A4: Always 30% advance payment/deposit by T/T, and 70% paid before shipment.
Q5: How long is your air cooler warranty?
A5: The warranty time for air cooler is 1 year. If the parts broken in 1 year, we all can offer you new parts in next order.
Q6: How long is the delivery time?
A6: Generally it is within 7-10 days after the deposit. but also depend on the order quantity. we promise offer in 1 month.
Company Introduction:
Taizhou Yingshi is specialized in the production of environmental protection air cooler, environmental protection air cooler accessories manufacturers, and is the only one with advanced mold manufacturing experience, the professional mold manufacturing technology and the manufacture of cooling fan combined, set the research and development, design, manufacture, sales of cooling fan accessories as one of the modern enterprises. The company has a number of full-time graphic modeling designers, professional mold division, and has a large mold production workshop and dozens of large injection molding machines, forming a professional production line of cooling fan parts. "Quality for survival, integrity for development", from product research and development, production and other links have always insisted on product quality as the fundamental, the implementation of full participation in product quality supervision and management, pay attention to the testing and control of each link of the product, to create high-quality products.
Less consumption, nearly 1 degree an hour
Beautiful plastic appearance with dust filter
Adopt centrifugal blower, low noise high efficiency
Adopt 100mm 5090 cooling pad, the cooling capacity is strong
Set ventilation, ventilation, dust, smell reduction, cooling in one
Evaporative Air Coolers are an environmentally-friendly and cost-friendly cooling option for your home. Much like a breeze flowing across a lake or the refreshing cool air you feel near a waterfall, air coolers produce a comfortable, cool breeze with the natural process of water evaporation. When warm air is drawn into the Evaporative Cooler, it is filtered through a wet honeycomb cooling medium, which absorbs heat and naturally cools and humidifies the air. A powerful fan pushes the cool air out of the front of the unit into the surrounding area. This no-compressor system cools naturally, efficiently and inexpensively.
Evaporative Air Coolers are more effective in areas with maximum relative humidity of 60% or less. Warm, dry air is important for more effective evaporative cooling and the temperature decrease will be greater in drier environments because higher evaporation occurs when the humidity is low. Evaporative Air Coolers produce moisture and can be used to increase humidification in a room. They are ideal for maintaining a cool breeze and increase comfort in homes located in drier regions.
Centrifugal Air Cooler Specification:
Model | CY-18TC/DC/SC | CY-18TC1/DC1/SC1 |
Air discharge | Top/Down/Side | Top/Down/Side |
Power | 0.75kW | 1.1kW |
Air flow | 12000 | 15000 |
Fan type | Centrifugal | Centrifugal |
Frequency | 50HZ/60HZ | 50HZ/60HZ |
Voltage | 3 phase 380/220/415V | 1 phase 220V |
Control system | Frequency inverter system | Single speed Controller |
Size | 1.08*1.08*1.18m | 1.08*1.08*1.18m |
Air pressure | 235Pa | 250Pa |
Cooling area | 80-100m³ | 100-120m³ |
Noise | 70DB | 72DB |
Water tank | 30L | 30L |
Water consumption | 10-15L/h | 10-15L/h |
Weight | 70kg | 70kg |
Air outlet size | 670*670mm | 670*670mm |
Cooling pad size | 870*760*100mm | 870*760*100mm |
Centrifugal Air Cooler Configuration:
Casing: modified PP plastics adopted, high strength, not easy deformation, anti-ultraviolet ray and ageing resistance.
Blower fan: novel wind blades adopted, sufficient air quantity, high pressure, and effective noise inhibition.
Centrifugal wind wheel: super-silent, high hydrostatic pressure, blowing further.
Motor: full aluminum casing adopted, good appearance, light weight, quick heat dissipation, high efficiency, dust and moisture prevention, high quality dual sealed bearings equipped, and high safety and maintenance free.
Cooling pad: imported paper adopted, good water absorption, high evaporation efficiency, specially formulated glue, greenness and environmental protection, good viscosity, no degumming even being soaked all the year around, and a long service life.
Water pump: a permanent magnetism footed pump, high efficiency, and overcoming the defect of easy damage caused by water deficiency, idling and scaling.
Dust net :With an outside dust screen, this can be easily removed and cleaned.
FAQ:
Q1: Are you the trading company or manufacturer?
A1: WE are the professional evaporative air cooler manufacturer. Have been in this industry for more than 10 years.
We design the air cooler model, make the air cooler mould, produce the air cooler parts all by ourselves.
Q2: Can you offer me better price?
A2: we have many type air cooler, you can choose which you need. Different Configuration price will be different.
Q3: Can you make specific voltage and thickness of cooling pad, and use our own brand?
A3: We can offer 110V-120V, 220V-240V, 380V-415V., frequency 50HZ-60HZ. Cooling pad always we use is 10mm, if you need 12mm, we also can make for you. Brand and air cooler, we can make OEM for you.
Q4: What is the payment term?
A4: Always 30% advance payment/deposit by T/T, and 70% paid before shipment.
Q5: How long is your air cooler warranty?
A5: The warranty time for air cooler is 1 year. If the parts broken in 1 year, we all can offer you new parts in next order.
Q6: How long is the delivery time?
A6: Generally it is within 7-10 days after the deposit. but also depend on the order quantity. we promise offer in 1 month.
Company Introduction:
Taizhou Yingshi is specialized in the production of environmental protection air cooler, environmental protection air cooler accessories manufacturers, and is the only one with advanced mold manufacturing experience, the professional mold manufacturing technology and the manufacture of cooling fan combined, set the research and development, design, manufacture, sales of cooling fan accessories as one of the modern enterprises. The company has a number of full-time graphic modeling designers, professional mold division, and has a large mold production workshop and dozens of large injection molding machines, forming a professional production line of cooling fan parts. "Quality for survival, integrity for development", from product research and development, production and other links have always insisted on product quality as the fundamental, the implementation of full participation in product quality supervision and management, pay attention to the testing and control of each link of the product, to create high-quality products.