Posted in

What regulations apply to open circuit cooling towers?

As an open circuit cooling tower supplier, I’ve spent years navigating the regulatory maze that governs these essential systems—sometimes it feels like every region has its own set of rules, and missing even one can lead to costly delays or compliance headaches for customers. Today, I want to pull back the curtain on the key regulations that apply to open circuit cooling towers, share the practical context our team uses to help clients stay compliant, and wrap up with how we make that process simpler for anyone working with these systems. Open Circuit Cooling Tower

First, let’s ground this in what an open circuit cooling tower does, because context matters for understanding why regulations exist. These systems work by pulling warm process water up through a fill pack, where it evaporates into the air, dropping the water temperature before it’s recirculated back to cool industrial equipment, HVAC systems, or power generation components. Because they expose water to the atmosphere, they’re hotspots for microbial growth, especially Legionella, plus they can impact local air quality, water use, and water discharge. That’s exactly why regulators have targeted them—they’re not arbitrary rules; they’re built to protect public health and environmental resources.

Let’s start with the most universal regulatory frameworks, ones that apply almost everywhere industrial or commercial open circuit cooling towers operate. The first is around Legionella control, a non-negotiable for any facility using these systems. Legionnaires’ disease, a severe pneumonia caused by Legionella bacteria, is linked directly to cooling tower water droplets that can become airborne. In the U.S., the Occupational Safety and Health Administration (OSHA) sets general guidelines for employer responsibility to prevent occupational exposure to harmful pathogens, and the Centers for Disease Control and Prevention (CDC) publishes the CDC Legionellosis: Legionnaires’ Disease manual, which is widely adopted as a standard for cooling tower maintenance and water treatment. For example, the CDC recommends regular water testing for Legionella, maintaining proper biocide levels, and ensuring drift eliminators (the parts that catch water droplets before they escape) are in good working order. I’ve seen too many of our customers skip routine testing early on, only to face a CDC notice or even a facility shutdown after a Legionella scare—regulations aren’t just red tape here; they’re life-saving.

Beyond public health, water use regulations are another big piece of the puzzle, especially in regions facing drought or water scarcity. In places like California, parts of the Southwest U.S., and much of Europe, open circuit cooling towers rely on large volumes of water for both makeup (replacing what evaporates or drifts away) and blowdown (removing mineral buildup from the water). States like California have the California Code of Regulations (CCR), Title 22, which sets strict limits on water use for cooling systems, and requires facilities to implement water efficiency measures like side stream filtration or closed-loop blowdown recycling. In the European Union, the Water Framework Directive (WFD) mandates that all water use is sustainable, so cooling towers there must meet specific discharge limits for pollutants like total dissolved solids (TDS) and heavy metals. That’s why when we design a custom open circuit cooling tower for a client in a drought-prone area, we always integrate features like high-efficiency drift eliminators and blowdown recovery systems—our team doesn’t just sell a tower; we build it to fit local regulations from the start.

Air quality regulations are another set of rules that vary by location but are critical for compliance. Open circuit cooling towers can emit particulate matter, volatile organic compounds (VOCs), and even excess moisture that can impact local air quality. In the U.S., the Environmental Protection Agency (EPA)’s National Emission Standards for Hazardous Air Pollutants (NESHAP) applies to certain industrial cooling towers, especially in refineries, chemical plants, and power stations. For smaller commercial HVAC cooling towers, most states have their own air quality rules, often aligned with the EPA’s standards. In the U.K., the Environment Agency (EA) regulates cooling tower emissions under the Clean Air Act 1993, requiring permits for systems over a certain size and regular emissions testing. I remember a customer in Texas who almost missed a permit because they didn’t realize their 500-ton cooling tower fell under EPA’s NESHAP for industrial facilities—we worked with them to adjust the tower’s drift rate and install a particulate capture system before their permit application was denied. That’s the value of partnering with a supplier who knows these rules inside out.

Now, it’s important to note that regulations aren’t just national—local and municipal rules can be even more strict, especially when it comes to siting. Many cities have setback requirements that dictate how far a cooling tower must be from residential buildings, schools, or hospitals. For example, New York City’s New York City Building Code requires cooling towers to be at least 50 feet from any property line that abuts a residential zone, and 100 feet from a school if the tower’s drift rate exceeds a certain limit. Some coastal cities have additional rules to protect saltwater corrosion, while mountain cities might have noise limits that require sound-dampening features on cooling towers. We recently worked on a project in Seattle where the city’s Department of Construction and Inspections required a 75-foot setback from a nearby apartment complex; our design team adjusted the tower’s footprint and added a noise enclosure to meet both the setback and noise rules without sacrificing cooling efficiency.

For international clients, there are even more specific regulations to consider. In Canada, the Canadian Standards Association (CSA) Standard B124 covers cooling tower design, water treatment, and Legionella control, and is required for any tower operating in provinces like Ontario and Quebec. In Australia, the Australian Standard AS 3666 sets rules for cooling tower hygiene, including mandatory monthly water testing and annual professional inspections. I once assisted a client in Sydney who had imported a cooling tower from overseas without checking AS 3666—they had to retrofit the fill pack and add a more robust biocide dosing system before it could be commissioned, which cost them months of downtime. That’s why our team includes compliance specialists who stay up to date on every regional standard across North America, Europe, Asia, and Australia—so our clients don’t make that same mistake.

A common question we get is: “What happens if I don’t follow these regulations?” The consequences can be severe. In the U.S., OSHA can issue fines up to $15,625 per serious violation, and up to $156,255 for willful or repeated violations. The EPA can issue fines of up to $40,654 per day for air or water permit violations, and municipal governments can order the shutdown of non-compliant cooling towers until issues are fixed. Beyond fines, there’s reputational damage—facilities with Legionella outbreaks can face public backlash, lost contracts, and legal action from affected workers or community members. That’s why proactive compliance isn’t just a box to check; it’s a core part of operating any facility with an open circuit cooling tower.

The good news is that compliance doesn’t have to be a burden when you partner with the right supplier. Our team works closely with every client to audit their specific regulatory requirements before even proposing a cooling tower. We design systems to meet local rules on Legionella control, water use, emissions, and siting from the ground up, rather than retrofitting after the fact. We also provide ongoing support, including guidance on water testing schedules, maintenance protocols, and permit renewals, to ensure our clients stay compliant long after installation. For example, last quarter we supported a manufacturing client in Chicago through a Legionella audit by the local health department—we walked them through their water treatment logs, adjusted biocide dosing rates, and helped them pass the inspection on their first try.

If you’re an engineer, facility manager, or plant operator working with open circuit cooling towers, navigating these regulations can feel overwhelming. You don’t have to do it alone. Our team is ready to discuss your specific needs, review your local regulatory requirements, and help you design a cooling tower that’s compliant, efficient, and tailored to your operations. Reach out to us today to learn more, and let’s turn compliance into a simple part of your cooling system project.

Round Cooling Tower References:
CDC Legionellosis: Legionnaires’ Disease.
California Code of Regulations, Title 22.
U.S. EPA National Emission Standards for Hazardous Air Pollutants (NESHAP).
Environment Agency (UK) Clean Air Act 1993.
Canadian Standards Association (CSA) Standard B124.
Australian Standard AS 3666.


Zhongling Electric Cooling Equipment Co., Ltd.
As one of the most professional open circuit cooling tower manufacturers and suppliers in China, we warmly welcome you to wholesale durable open circuit cooling tower at competitive price from our factory. If you have any enquiry about quotation, please feel free to email us. Customized orders are welcome.
Address: Junshan Rongqi Avenue, Yunshan Economic Development Zone, Yongxiu County, Jiujiang City, Jiangxi Province
E-mail: gongmeichuang@126.com
WebSite: https://www.zhonglingcooling.com/