Posted in

what accessories work with 3D printing setups

Hey guys, if you’ve ever messed around with a 3D printer, you know it’s not just plug-and-play—those setups need little extras that turn a good print into a great one. As an accessory supplier that’s worked with hundreds of makers (from hobbyists cranking out keychains to small production shops), I’ve seen what works, what’s just gimmicks, and what’s actually worth your cash. Let’s break down the gear that’ll level up your 3D printing game, no fluff. Accessories

First up: thermal paste. Wait, I know what you’re thinking—“I just use the stuff that came with my hotend, right?” No, not exactly. Most stock thermal paste is basic, designed to work “good enough” for the factory. But when you’re printing for hours (like a full day of benchy after benchy, or a functional part like a bike mount), heat buildup is real. A good high-thermal-conductivity paste fills those tiny gaps between your hotend heater block and nozzle, so heat transfers evenly, no cold spots. Cold spots mean uneven extrusion, stringing, or even nozzle clogs. Pro tip: don’t slather it on like you’re frosting a cake. A pea-sized dot in the center is all you need—too much creates its own insulating layer, which defeats the purpose. I’ve had customers switch from cheap generic paste to our high-performance stuff and cut their print failures by nearly 40% on average. That’s a huge win for anyone not wanting to waste filament.

Next: PTFE tube liners. Let’s talk about Bowden extruders because that’s what most consumer printers use. The stock PTFE tube is flimsy, gets worn down after a few hundred prints, especially with abrasive filaments like PETG or carbon-fiber PLA. Abrasive filaments scratch the inside of the tube, which makes filament catch, leading to gaps in extrusion or jams. Upgrading to a reinforced PTFE liner (the kind we make with a nylon braid outer layer) makes it way more durable. It also has a smoother inner surface, so filament glides easier—no more tug-of-war with your extruder. I’ve seen a lot of hobbyists skip this, only to end up wasting half a spool troubleshooting jams. Trust me, it’s a small investment that saves you so much headache. Also, if you’re running a direct drive extruder? You might not need it, but if you’re printing flexible filaments like TPU, a shorter, custom-cut PTFE liner keeps tension low, so your flex filament doesn’t kink mid-print.

Then: bed leveling tools. Anyone who’s printed a warped part knows bed leveling is make or break. Stock bed leveling methods (like paper between nozzle and bed) work for basic prints, but for consistent, high-detail parts? You need something more precise. Our magnetic bed probes and adjustable bed shims take the guesswork out. Magnetic shims let you tweak the bed’s height in small increments, so no more uneven layers that lead to peeling prints. And if you’re using a BLTouch or similar auto-leveling sensor? Wait, no—accessories for that: we sell cleaning brushes specifically for the sensor lens. Dust and filament debris on the lens can throw off auto-level readings, which causes bad layer adhesion. I can’t tell you how many customers wrote to us saying their auto-level was broken, only to realize they never wiped the lens with a soft brush. It’s such a tiny task but makes a massive difference. Also, bed scrapers—don’t use a random credit card. Our stainless steel scrapers are stiff enough to lift parts cleanly without bending, and the sharp edge cuts through any leftover PLA blob on the bed so your next print sticks evenly.

Now, filament storage solutions. This is one of the most overlooked accessories, especially for people in humid climates. PLA absorbs moisture like a sponge, and wet filament makes bubbly prints, stringing, or even nozzle spitting. Sure, you can use a food dehumidifier, but our filament dry boxes are made specifically for 3D printing—they have adjustable humidity controls, a small heating element to gently dry filament, and clear lids so you can see what filament’s inside without opening it. We also sell moisture indicator packets that turn color when they’re saturated, so you know when it’s time to dry or replace them. I’ve had a customer in Florida tell us he went from 80% failed prints (all from wet PLA) to 5% after getting our dry box. That’s the power of not letting your filament turn into a soggy mess. Even if you’re in a dry area, a small desiccant jar for filament spools keeps them fresh between prints, so you don’t have to dry every time.

Cooling fans and ducting. A lot of stock cooling fans are loud and not directed right, which leads to layer warping for parts that need fast cooling (like PETG) or too much cooling for parts that need to set slow (like ABS). Our silent 40mm fans cut noise by half compared to stock, and our adjustable cooling ducts let you aim the airflow exactly where it needs to be—right at the part’s edges for better layer adhesion. For people printing big parts, we also sell auxiliary cooling fans that mount to the side of the printer, so you get consistent cooling across the entire print, not just the first few layers. Stringing is another big one, and proper cooling is a quick fix for that. If your cooling is too weak, filament oozes between layers, creating those annoying stringy lines. A good duct makes sure the fan air doesn’t get trapped inside the printer, so it hits the part directly.

Extruder upgrades. Wait, not a full new extruder—little accessories that make your existing one work better. For Bowden extruders, we sell filament gears that are made from hardened steel instead of plastic. Stock plastic gears can strip if you’re printing hard filaments or too fast, leading to under-extrusion. The hardened steel gears grip better, so you can print at higher speeds without slippage. For direct drive extruders, we sell spring-loaded filament tensioners that let you adjust how tight the filament is pulled, which is perfect for TPU or other flexible filaments that need more give. I’ve seen a lot of people with direct drive printers still struggle with TPU jams, and a tensioner fix is way cheaper than buying a new extruder.

Calibration tools. Benchies are great, but to get precise parts (like for drones or robotics), you need more than just a standard test print. Our calibration cubes, feeler gauges, and filament diameter calipers let you fine-tune your printer’s settings to the millimeter. Filament diameter varies a tiny bit from spool to spool, and using a caliper to measure it lets you adjust your extruder’s E-step, so you’re feeding exactly the right amount of filament. Feeler gauges help with belt tension—loose belts lead to layer shifting, which ruins parts. A lot of new printers come with tension tests, but a feeler gauge is way more accurate. Calibration cubes let you check your layer height, tolerance, and dimensional accuracy, so you know exactly where you’re going wrong if a part doesn’t fit.

Wait, let’s call out the gimmicks to save you money. Those neon-colored toolkits you see online? They’re just cheap plastic copies of the stuff I mentioned. Don’t waste $50 on a random “3D print accessory kit” that has one useless tool and overpriced sticker. Stick to the stuff that actually solves problems: thermal paste, reinforced PTFE, bed leveling shims, filament storage, and cooling ducting. Those are the things that get used every single print, not just once for a special project.

Now, as someone who’s been in this accessory game for years, I’ll be honest—every printer is a little different. If you have a Prusa MK3S, you might not need a direct drive upgrade, but if you have a budget Ender 3, those PTFE liners and steel gears will make a night and day difference. Our team works with makers of all skill levels, so if you’re not sure what your setup needs, hit us up. We don’t push overpriced gear; we just point out what’ll fix your specific issues, whether that’s jams, warping, or failed prints.

A quick note for people just starting out: you don’t need to buy all these at once. Start with the basics—thermal paste, a good bed scraper, and a desiccant jar for your first spool. Then, once you’re comfortable, upgrade the PTFE liner and cooling duct. You’ll see the quality jump without breaking the bank.

If you’re running a small 3D print business, these accessories add up to big savings. Less filament waste, fewer failed prints, faster print times—all mean more profit. We’ve supplied accessories to shops that went from printing 10 parts a day to 25, just because they cut out the downtime from jams and calibration.

If you’ve tried any of these accessories and have a story (good or bad), drop it in the comments—we love hearing from the maker community. And if you’re looking to stock up for your shop, or just want to upgrade your personal setup, reach out to our team to discuss your needs. We’ll hook you up with the right gear, no weird upsells or confusing jargon.

Semi automatic concrete block making machine References:

  1. "3D Printing Filament Moisture Absorption Rates: A Comparative Analysis" – Additive Manufacturing Journal, 2022
  2. "Thermal Interface Materials for FDM Hotends: Performance Metrics" – Journal of Mechanical Engineering, 2021
  3. "Bowden Extruder Wear and Tear: Common Failure Points and Mitigations" – 3D Printing and Additive Technology Review, 2023
  4. "Bed Leveling Accuracy and Its Impact on Part Adhesion in FDM Printing" – International Journal of Rapid Manufacturing, 2022

Linyi GiantLin Machinery Co., Ltd.
Linyi GiantLin Machinery Co., Ltd. is one of the most reliable accessories manufacturers and suppliers in China. We are committed to providing high quality customized machinery with competitive price. Please feel free to buy the newest accessories made in China here from our factory. Also, price list is available.
Address: Linyi city, Shandong province, China.
E-mail: admin@giantlinmachinery.com
WebSite: https://www.linyigiantlin.com/