If you’re a new climber lacing up your shoes and stepping into a gym for the first time, one detail that might slip past you at first is how much those colorful, bumpy pieces of plastic on the wall matter. As a climbing walls supplier that’s worked with everything from home gyms for beginners to full commercial facilities, I’ve seen it over and over: a beginner who starts on holds that are too hard or mismatched to their skill level will walk away frustrated, maybe even decide climbing isn’t for them. On the flip side, choosing the right holds sets a solid foundation, makes learning feel achievable, and keeps climbers coming back. This post breaks down exactly what to look for when picking climbing wall holds for beginners, rooted in what new climbers actually need to build confidence, strength, and good habits. Climbing Walls

First, let’s start with size—this is one of the biggest mistakes I see new gym owners or home climbers make. When I’m consulting with a first-timer who’s building a small home wall, they often reach for the holds they see on pro climbers’ Instagram posts: tiny, crimpy edges that look cool but are impossible for someone with less hand strength. For beginners, bigger is almost always better… but not just random big—size relative to a beginner’s hand. A general rule is that holds should be at least as wide as the climber’s palm, with depth that gives enough surface area for all four fingers (not just the tips) to wrap around. Why? New climbers rely on their arm strength a lot at first, so large holds let them distribute their weight across more of their body instead of tiring out their hands in 10 minutes. I remember a client who set up a home wall for his 12-year-old daughter; he initially ordered a set of medium holds, but after we measured, we swapped them for large jugs and slopers. Within a week, she was topping routes she’d struggled on, and her hand strength improved way faster than before. Crimps can wait until they have a base of finger and grip strength—we always tell beginners to hold off on small edges until they can comfortably send V2-V3 routes without burning out their hands mid-climb.
Next, hold type and shape. There are three main categories of holds we supply, and each has a place for beginners, depending on the route’s grade and movement focus. Let’s break them down:
Jugs: These are the big, rounded, often rectangular holds that look like drinking jugs—they’re the first thing you’ll grab when stepping up to a beginner route. Jugs are non-negotiable for new climbers because they offer multiple grip options: you can wrap all four fingers around the front, hook your thumb over the top, or even place an entire hand on the flat surface. For routes up to V2, we recommend mixing 60-70% jugs; they give climbers a safe, predictable point to rest and adjust their balance, which is critical when they’re still learning to control their body. I’ve had a few gyms test runs with too few jugs for their beginner walls, and the feedback from new climbers was unanimous: they felt like every move was a test, not a fun challenge. Jugs should also be spaced a bit farther apart than they would be on advanced routes—12 to 18 inches apart, instead of the 6-10 inches you’ll see on V3 and up. That gives beginners time to move their feet and shift their weight without panicking about reaching too far.
Slopers: Slopers are the smooth, rounded holds with no defined edge—think of a giant, egg-shaped blob with no sharp corners. A lot of new climbers avoid slopers at first because they feel “slippery” or intimidating, but they’re actually great for building body awareness, which is a key skill for beginners. Slopers force you to use more core and leg strength instead of just pulling with your arms—you can’t yank a sloper like a jug; you have to press your hand into it and distribute your weight. For that reason, we add slopers to beginner routes at a 10-15% ratio, but they should be slightly larger than the slopers you’ll see on intermediate walls. We supply “beginner slopers” with a rougher texture (more on that in a minute) and a wider, flatter profile so climbers can press more of their palm into them without slipping. I once worked with a gym in a college town that only used smooth, small slopers for their beginner routes, and they had a 30% higher rate of new climbers quitting within the first month than a nearby gym that used larger, textured slopers. It’s a small detail, but it makes a huge difference.
Crimps and pockets: I’m grouping these together because they’re not ideal for pure beginner routes, but small amounts can be useful for gradual progression. Crimps are the thin, edge-like holds that require you to only use the tips of your fingers; pockets are the holes or indentations where you stick your fingers. For absolute beginners (V0-V1), we recommend almost no crimps or pockets—even one small crimp on a route can throw off a new climber’s balance, since they’re not used to supporting their weight on just their fingertips. If you want to introduce these, save them for the last hold of a route, spaced far apart from the rest, so it’s a fun “win” instead of a frustrating obstacle. For example, a V1 route might end with a tiny crimp, so the climber has to pull up slightly, but all the earlier holds are jugs. This lets them build confidence before tackling a smaller grip.
Texture is another detail that’s often overlooked, but it can make or break a beginner’s experience. Most holds today come in two main textures: glossy, smooth plastic and textured (often called “tactile”) or “semi-rough” surfaces. For beginners, textured is non-negotiable. Glossy holds look sleek, but they’re slippery when hands get sweaty—something every new climber deals with, especially when they’re nervous. Textured holds have small, raised ridges or a matte finish that gives grip even when hands aren’t perfectly dry. That said, not all textured holds are the same. We offer three texture levels for our holds: soft textured (gentle ridges, good for beginners), medium textured (for intermediate climbers), and aggressive textured (for advanced routes). For beginner walls, we stick to soft textured—too much aggressive texture can irritate new climbers’ hands, which are not used to the pressure of gripping hard. I learned this early on when a client ordered a bulk set of aggressive textured holds for their beginner home wall; their 10-year-old climber ended up with red, sore fingertips after one session. Swapping to soft textured fixed that issue instantly, and they loved the grip.
Placement is just as important as the holds themselves, and it ties back to building good habits. A lot of new wall builders place holds to look aesthetically pleasing, but for beginners, the route should follow what’s called a “bouldering ladder” or easy grade progression. That means holds are placed to encourage footwork first, not just arm strength. For example, a beginner route should have large foot holds (slightly textured, flat platforms) that are easy to stand on, so the climber learns to push with their legs instead of pulling with their arms. We always advise against placing holds high above a beginner’s reach—keep starting holds at least 6 feet off the ground for boulders, and 8-10 feet for top rope routes, so climbers don’t have to stretch excessively to start. Excessive stretching leads to poor form, which can cause shoulder strain later on, so it’s better to keep routes slightly shorter than too long for beginners.
Another thing to consider is variety— but not too much variety. New climbers don’t need a dozen different hold shapes; they need a consistent set that lets them learn how each type works. For example, if you’re building a home wall for a new climber, stick to a set of large jugs, a few slopers, and maybe one or two small crimps for progression. If you’re running a commercial gym, organize your beginner wall into “starter sets” of holds, so every V0 route uses similar hold sizes and types, instead of switching randomly. That consistency lets new climbers build muscle memory and recognize what grip works where, instead of being overwhelmed by new shapes every time.
I’ve also seen a common myth that “cheaper holds are fine for beginners.” That’s not true. Cheap holds are often made from thinner plastic that can crack easily, or have inconsistent texture that’s slippery in spots. They might also have sharp edges on the back, which can scratch climbers if they fall. When I supply holds for beginner walls, I recommend investing in mid-range holds that are durable, have consistent texture, and come with rounded edges. The small extra cost is worth it for the safety and comfort of new climbers—one broken hold can not only be a hazard, but it can also ruin a new climber’s confidence if they slip on a sharp edge during a fall.
At the end of the day, choosing holds for beginners is all about balance: you want to challenge them, but not frustrate them. The best beginner routes are the ones that feel doable, even if they’re pushing a little. When you pick large, textured jugs and slopers, place them to encourage good footwork, and avoid crimps until they’re ready, you’re not just building a wall—you’re building a space where new climbers feel excited to come back, try harder, and learn.

If you’re outfitting a home climbing wall, a gym, or any other climbing space and need help picking the right holds for beginners, we’re here to walk you through every step. We’ve worked with hundreds of facilities to curate hold sets that fit beginner needs, and we can advise on sizes, textures, and placements based on your space and the climbers you’re serving. Reach out to us to discuss your climbing wall hold needs and start building a space that helps new climbers thrive.
Soft Play Equipment References
- American Council on Exercise. (2022). Core Strength for Beginner Climbers: Foundations of Technique.
- Climbing Wall Association. (2021). Guidelines for Beginner-Friendly Climbing Wall Design and Equipment.
- The Journal of Sports Medicine and Physical Fitness. (2019). Grip Mechanics in Novice Rock Climbers: The Impact of Hold Size and Texture.
Guangzhou Playpedia Amusement Co., Ltd.
Guangzhou Playpedia Amusement Co., Ltd. is one of the leading climbing walls manufacturers and suppliers in China. We warmly welcome you to buy discount climbing walls from our factory. All customized products are with high quality and competitive price.
Address: No.26, Diyong Village Section, Haiyong Road, Shiji Town, Panyu District, Guangzhou, China
E-mail: sales2@playpedia.cn
WebSite: https://www.playpediapark.com/