800kw 220usrt corrugated aluminum fin air cooler Air-cooled chiller for wine processing

We can customize different kinds of chillers and central air conditioners according to customer request, welcome to contact us for details,we will provide professional solutions for you.800KW 220USRT Ripple Aluminum Fins Air Cooler Air cooled Water Chiller for Wine Processing1. High Efficiency2. Low Operation Cost3. Customize De

Featured Products

We can customize different kinds of chillers and central air conditioners according to customer request, welcome to contact us for details,we will provide professional solutions for you.
800KW 220USRT Ripple Aluminum Fins Air Cooler Air cooled Water Chiller for Wine Processing
1. High Efficiency
2. Low Operation Cost
3. Customize Design

    SANHER SHL series screw chillers adopt the excellent 5:6 rotor high-efficiency twin-screw compressor as the refrigeration core, equipped with high-quality and high-efficiency condenser and evaporator, supplemented by precise PLC computer control system, and assembled by elaborate processing.
    There are dozens models of SHL series Air-cooled chiller with cooling range from 62KW to 958KW, and the chilled water temperature adjustment range is 5°C~20°C.
    
800kw 220usrt Ripple Aluminum Fins Air Cooler Air Cooled Water Chiller for Wine Processing
800kw 220usrt Ripple Aluminum Fins Air Cooler Air Cooled Water Chiller for Wine Processing


Features:
1. High Efficiency
  • Using high efficiency 5:6 rotor twin-screw compressor, the chiller operate with high efficiency in both full load and part load.
  • Patented screw profile design, improve the compressor efficiency.
  • High efficiency heat exchange tube and countercurrent design of the heat exchanger, improve the heat transfer efficiency on the water side and refrigerant side.
2. Low Operation Cost
  • By intelligent control, The chiller can adjust the load to 100%, 75%, 50%, 25%, 0.
  • The total parts number of the screw compressor is only 1/10 of the conventional compressor. With Simple structure, few wearing parts, no inlet and exhaust valves, not sensitive to the humidity, the failure rate of screw chiller is extremely low.  Our screw chiller can run for 40,000 hours without trouble.
3. Customize Design
We can produce the non-standard chillers according to different countries, different power supply system or different customer request. Also we can customize screw-type integrated units, anti-corrosion unit, explosion-proof unit and other special industry units according to customer request.  There are a variety of refrigerant options, such as R22, R407C, R134a and other refrigerant.
800kw 220usrt Ripple Aluminum Fins Air Cooler Air Cooled Water Chiller for Wine Processing

Specifications:
Air-cooled Screw chiller capacity from 62KW to 958kw. Here are some model specifications. Welcome to contact with us for more model details.
Model    SHL-460AD520AD600AD620AD
RefrigerantR22R407CR134aR22R407CR134aR22R407CR134aR22R407CR134a
Nominal Cooling Capacity×1000kcal/h387.9374.1273.5417.1408.5281.2491.9483.3331.9520.3510.8353.5
KW451435318485475327572562386605594411
USRT128.3123.790.4137.9135.193162.7159.8109.8172.1168.9116.9

Comp.Input power(KW×QTY)
58.9×259.4×240.7×264.3×265.2×241.7×272.9×272.6×247.7×277.6×276.4×250.8×2
 Power Supply3Phase-380V-50Hz
Protection DeviceReverse phase protection,phase loss protection,overcurrent protection,high and low voltage protection,low temperature protection,water flow protection
Number Of Refrigeration Circuit2
 Capacity Control(%)Stepless Capacity Control or 0,25,37.5,50,62.5,75,87.5,100
Refrigerant charge 7572538079549593641009968
Air Cooled Heat ExchaugerRipple Aluminum Fins Around Copper pipe
Evaporatorin Dia.of pipe to Evaporator(inch)43×23×23×2
Water Side max Pressure(MPa)1
Chilled Water Flow(m³/h)77.674.854.783.481.756.298.496.766.4104.1102.270.7
Water Pressure drop(Kpa)66525454
Axial FanAir Folw ×1000     m³/h190204240254
Power(KW×QTY)1.32×121.32×121.4×121.4×12
Running noise Db(A)72727272
Total Weight(kg)4250443045505440
Running Weight(kg)4380475049705880
Note:
1. Nominal cooling capacity based on: Air dry/wet bulb temperature 35°C/24°C, Evaporator inlet and outlet water temperature 17ºC/12ºC, Fouling coefficient 0.088.ºC/KW;
2. Chilled water temperature range: 5ºC ~ 15ºC; R134a: 5ºC ~ 20ºC;
3. Ambient temperature range: 15ºC~43ºC;R134a:20ºC~50ºC;
4. Specifications and dimensions will be subject to change without notice.


About SANHER
            SANHE Freezing Machinery (Guangzhou)Co., Ltd. is a joint venture which was established by domestic Huizhuo and Japan Ronghe corporation with a total investment in 2017. It located in Guangzhou Economic and Technological Development Zone . Combined with Japan R&D center and Guangdong University of Technology, We are committed to industrial chiller, central air conditioner, magnetic centrifugal chiller R&D and manufacture.

800kw 220usrt Ripple Aluminum Fins Air Cooler Air Cooled Water Chiller for Wine Processing
Our Main Product:
1)   Magnetic Bearing Centrigufal Chiller
2)   Water cooled Screw Chiller, Air cooled screw Chiller, Flooded type Screw Chiller ,Evaporative Cooled Screw Chiller

3)   Water cooled Scroll Chiller, Air cooled Scroll Chiller
4)   Water-cooled Packaged air conditioner, Air-cooled Packaged air conditioner , clean constant temperature and humidity air conditioner, Precision air conditioning
5)   Low temperature chiller(0ºC to -50ºC)

6)   Anti-corrosion Chiller , Explosion-proof Chiller, etc.

800kw 220usrt Ripple Aluminum Fins Air Cooler Air Cooled Water Chiller for Wine Processing

Certificate
800kw 220usrt Ripple Aluminum Fins Air Cooler Air Cooled Water Chiller for Wine Processing

Cases
800kw 220usrt Ripple Aluminum Fins Air Cooler Air Cooled Water Chiller for Wine Processing



PACKAGE
Plastic film + wooden frame/wooden box  for exporting

800kw 220usrt Ripple Aluminum Fins Air Cooler Air Cooled Water Chiller for Wine Processing



FAQ
Q1: Are you a manufacturer? 
A1: Yes, we have more than 10 years in water chiller business. New plant was bulit in 2017 in Guangzhou Economic&Technological Development Zone. Welcome to visit us anytime!

Q2: Could you help us to recommend the model for our project? 
A2: Yes, we have engineer to check the details and make the scheme for you. Based on the following:

1)Cooling capacity;
2) Refrigerant;
3) Ambient temperature;
4)Voltage;
5) For what industry
6)The building drawing(if you have)
7)Any other special requirements.  

Q3: How to ensure your product with good quality? 
A3: We use the well-know brand accessories, such as Hanbell , copeland, danfoss compressor, Emerson expansion Valve, Siemens controller.  All SANHER chillers are factory tested under load conditions to ensure good quality and easy installation for users.

Q4: What's the warrenty? 
A4: 1 year warrenty for free if confirmed by both side damage in the quality reason. 


Q5: Whats your payment term?
A5: We accept TT, LC, Western Union, etc. Normally ,30% deposit for production, 70% balance before shipment.

Q6: How can I place an order? 
A6: Contact us via made in China or contact below information.
Ms.Livia
Tel:0086 20 31600228-820
Mobile:0086 13590226431

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours