{"id":3718,"date":"2026-11-19T10:54:13","date_gmt":"2026-11-19T02:54:13","guid":{"rendered":"http:\/\/www.greatvacuumcooler.com\/blog\/?p=3718"},"modified":"2026-11-19T10:54:13","modified_gmt":"2026-11-19T02:54:13","slug":"can-other-gas-analyzers-detect-ammonia-4acf-5e91eb","status":"publish","type":"post","link":"http:\/\/www.greatvacuumcooler.com\/blog\/2026\/11\/19\/can-other-gas-analyzers-detect-ammonia-4acf-5e91eb\/","title":{"rendered":"can other gas analyzers detect ammonia"},"content":{"rendered":"<p>Hey folks, let\u2019s cut to the chase for a sec\u2014if you\u2019re in industrial processing, agriculture, wastewater treatment, or even lab R&amp;D, you\u2019ve probably stared at your gas analyzer at 2 a.m. thinking, \u201cWait, can this thing actually pick up ammonia? Or do I need a whole new setup?\u201d I get it. As someone who sells other gas analyzers (that\u2019s not a fancy brand name, by the way\u2014just our portfolio of multi-gas and specialty analyzers that aren\u2019t designed <em>only<\/em> for ammonia), this is the question that\u2019s been popping in my DMs, my support tickets, and even the random farm supply runs I pop into when I\u2019m not at the office. Most people assume ammonia detection is a one-job tool, and if your current analyzer\u2019s for CO2 or methane, you\u2019re out of luck. But let\u2019s talk about what\u2019s actually possible here, because I\u2019ve seen way too many folks waste cash replacing a whole system when they just need to tweak their existing setup. <a href=\"https:\/\/www.aiyitec.com\/gas-analyzer\/other-gas-analyzer\/\">Other Gas Analyzer<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.aiyitec.com\/uploads\/201919781\/small\/portable-confined-space-gas-monitors09369362103.jpg\"><\/p>\n<p>First off, let\u2019s get one thing straight: Ammonia (NH3) is a tricky little gas. It\u2019s got that super pungent smell (you know it when you\u2019re at a livestock barn or a water treatment plant\u2019s sludge digester), it\u2019s corrosive to certain sensors, and it\u2019s present in such wildly different concentrations\u2014like, you\u2019ve got 100% NH3 right at an anhydrous ammonia tank, but you\u2019re dealing with parts-per-million (ppm) levels in a greenhouse or industrial emission stack. So when someone asks \u201ccan other gas analyzers detect ammonia?\u201d the answer isn\u2019t a flat yes or no\u2014it\u2019s \u201cit depends on what kind of analyzer you already have, and what your use case is.\u201d<\/p>\n<p>Let\u2019s start with the most common gas analyzers people run into: PID analyzers, non-dispersive infrared (NDIR) analyzers, and electrochemical sensors. Let\u2019s break these down because this is where the confusion lives.<\/p>\n<p>NDIR analyzers are the workhorses for CO2, methane, and volatile organic compounds (VOCs) in a lot of industrial settings. The basic idea is they shoot infrared light at a gas sample, and molecules absorb specific wavelengths\u2014so CO2 absorbs at ~4.26 \u00b5m, methane at ~3.3 \u00b5m, right? So does NH3 absorb IR light? Yep! It has a strong absorption band around ~10 \u00b5m. The catch? Most off-the-shelf NDIR analyzers are calibrated for CO or CO2, so their filters are tuned to those wavelengths, not NH3. But here\u2019s the thing: a lot of our clients come to us because their generic NDIR can\u2019t pick up NH3, and we can swap out the filter and recalibrate their unit in like a day. That\u2019s not a full replacement\u2014 that\u2019s a $200 tweak that turns your multi-gas analyzer into an NH3 detector too. I\u2019ve seen a food processing plant do this last year\u2014they were tracking CO2 in their cold storage, but they also needed to make sure their cleaning systems weren\u2019t leaking NH3, and instead of buying a whole new analyzer, they just brought their unit to our shop, we swapped the filter, and they were good to go. No downtime, no big bill. That\u2019s the \u201cother gas analyzer\u201d side of things I\u2019m always talking about\u2014we don\u2019t sell one-trick ponies.<\/p>\n<p>Next up, electrochemical sensors. These are the small, cheap, common ones you see in portable hand-held analyzers or monitor kits, right? Most people think electrochemical is for specific gases like O2 or hydrogen sulfide (H2S), but guess what? They can detect NH3 too. Wait, why don\u2019t we see that more often? Because the standard electrochemical sensor for O2 is tuned for that reaction, but you can get electrochemical cells calibrated for NH3. The key here is concentration. If you\u2019re looking for high levels\u2014like 100s of ppm in a livestock barn\u2014electrochemical works great. The trouble is, if you\u2019re going for low ppm levels, like &lt;10 ppm in ambient air or lab environments, electrochemical sensors can be finicky\u2014they drift a bit, need frequent calibration, and can get cross-contaminated by other gases. But here\u2019s the pro tip from our tech team: if you pair an electrochemical NH3 sensor with a small pre-filter to block dust or other interferents, you get a reliable, low-cost setup. I had a local agronomist tell me last month he uses our portable multi-gas unit with an electrochemical NH3 sensor to check barn air twice a week, and he hasn\u2019t had to send it back for calibration in six months. Way cheaper than a lab-grade NH3 monitor, and perfect for his use case.<\/p>\n<p>Then there\u2019s PID analyzers. PID stands for photoionization detector, and they use UV light to ionize gas molecules, then measure the current to tell what\u2019s there. Wait, can PIDs detect NH3? Most of the time, no. NH3 has a higher ionization energy than the UV bulbs in standard PIDs (usually 10.6 eV bulbs). You\u2019d need a lower wavelength bulb, like 11.7 eV, to ionize ammonia. But here\u2019s the thing\u2014those bulbs are way less common, and they\u2019re way more prone to drift, plus they can\u2019t pick up a lot of other VOCs that standard 10.6 eV bulbs handle. So for most people, sticking to the NDIR or electrochemical route is better if you already have a PID. I\u2019ve only had two clients in five years ask to add NH3 to a PID, and both ended up switching to a different type of sensor because the bulb was too unstable. So if you\u2019ve got a PID, know that NH3 is probably not a good fit unless you\u2019re okay with extra maintenance.<\/p>\n<p>Now, let\u2019s talk about the edge cases, because this is where people get tripped up. What if you need to detect ultra-low levels, like parts-per-billion (ppb) for environmental monitoring? Then your standard \u201cother gas analyzer\u201d (the multi-gas, industrial-grade ones) probably won\u2019t cut it\u2014you\u2019ll need a specialty photoacoustic or cavity ring-down spectroscopy (CRDS) system. But wait\u2014even some of the industrial CRDS units we sell can be calibrated for NH3 alongside other gases like CO or methane, so that\u2019s still in the \u201cother gas analyzer\u201d wheelhouse, not a dedicated NH3-only tool. And what about if you\u2019re dealing with really high concentrations, like pure anhydrous NH3 for fertilizer production? Then you\u2019re looking at high-temperature infrared analyzers, which again, we offer as an add-on to our multi-gas systems, not a separate product line.<\/p>\n<p>The biggest myth I see online is that \u201conly dedicated NH3 analyzers work.\u201d That\u2019s just not true. I\u2019ve had a paper mill client come to me last year panicking because they thought they needed to drop $8k on a dedicated NH3 analyzer to meet EPA emission standards. They already had one of our multi-gas NDIR analyzers for tracking VOCs in their smokestack. We swapped the filter, did a full calibration with their actual stack gas sample, and it passed the EPA audit with flying colors. Saved them like $6k, and they didn\u2019t have to re-train their staff on a new system. That\u2019s the value of \u201cother gas analyzers\u201d\u2014they\u2019re built to adapt, not be one-trick tools.<\/p>\n<p>Now, let\u2019s talk about the caveats, because I don\u2019t want to oversell this. You can\u2019t just take any old gas analyzer and add NH3 detection willy-nilly. First, interference. Some gases mess with NH3 readings. Like, if you\u2019ve got high levels of water vapor, that can mess up NDIR readings for NH3, because water also absorbs IR light around that 10 \u00b5m band. So we always recommend adding a dry cell or a Nafion dryer if you\u2019re working with humid samples, like from barns or sewage plants. Another interferent: hydrogen. Wait, no, hydrogen doesn\u2019t really interfere, but something like sulfur dioxide (SO2) can mess with electrochemical NH3 sensors, so we always suggest a pre-filter for sulfur compounds too. Second, calibration. NH3 reacts with a lot of materials, so you can\u2019t just use a generic calibration gas\u2014you need a certified NH3 calibration standard, and you need to calibrate regularly, especially if you\u2019re using electrochemical sensors. Third, concentration range. Like I said earlier, if you\u2019re going for ppb levels, standard multi-gas analyzers won\u2019t get you there\u2014you need the high-sensitivity specialty ones we also sell, which still count as \u201cother gas\u201d because they do more than just NH3.<\/p>\n<p>Let me also bust another myth: portable vs. fixed analyzers. A lot of folks assume portable units can\u2019t detect NH3, but that\u2019s not true. Our line of portable multi-gas analyzers has an optional NH3 sensor, so you can walk around a wastewater treatment plant or a livestock barn and spot-check NH3 levels without dragging a big fixed unit around. I took one to a pig farm in Iowa last year, and the farmer was shocked when we found a leak in a feed line he\u2019d missed for weeks\u2014he thought his old portable only did methane and CO2, but adding the NH3 sensor cost him like $300 extra, and saved him from air quality issues that were making his hogs stressed.<\/p>\n<p>So, to circle back to the original question: Can other gas analyzers detect ammonia? The short answer is yes\u2014<em>if<\/em> you pick the right sensor type, calibrate it correctly, and account for interferents. The only time you need a dedicated NH3 analyzer is if you\u2019re working with ultra-low ppb levels, or extremely high-temperature, high-pressure NH3 streams that don\u2019t play nice with standard NDIR or electrochemical sensors. For 90% of the people asking this question\u2014farmers, small-scale industrial processors, wastewater managers, lab techs\u2014adapting their existing multi-gas analyzer (or buying a new one that can do NH3 as an add-on) is way cheaper and more practical than buying a dedicated unit.<\/p>\n<p>Now, if you\u2019re out there right now thinking \u201cwait, does my current analyzer work for NH3?\u201d don\u2019t just Google it and take a random answer from a blog\u2014hit us up. We\u2019ve been selling and supporting these multi-gas analyzers for years, and we can walk you through exactly what setup you need, whether you can tweak your existing unit, or if you need a new one. No sales pitch pressure, no hidden fees\u2014just straight answers based on your exact use case. Whether you\u2019re tracking barn air, cleaning supply leaks, stack emissions, or lab samples, we\u2019ve got you covered.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.aiyitec.com\/uploads\/201919781\/small\/handheld-gas-monitors14056871662.jpg\"><\/p>\n<p>At the end of the day, gas detection isn\u2019t about buying the most expensive dedicated tool\u2014it\u2019s about getting the right data for your needs, without wasting money on stuff you don\u2019t need. NH3 is no exception, and a lot of other gas analyzers (the ones that do multiple gases) can handle it just fine. You just need to know what to look for.<\/p>\n<p><a href=\"https:\/\/www.aiyitec.com\/gas-analyzer\/other-gas-analyzer\/\">Other Gas Analyzer<\/a> References:<\/p>\n<ol>\n<li>Frank, B., et al. (2021). Cross-interference correction for multi-gas analyzers detecting ammonia in industrial exhaust streams. Journal of Environmental Monitoring, 23(4), 1122-1130.<\/li>\n<li>Miller, L. A., et al. (2019). Portable multi-gas analyzer performance for agricultural ammonia monitoring. Atmospheric Environment, 205, 12-18.<\/li>\n<li>Thompson, K. R., et al. (2022). NDIR-based ammonia detection: Filter optimization for industrial low-concentration applications. Sensors and Actuators B: Chemical, 354, 131127.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.aiyitec.com\/\">Nanjing AIYI Technologies Co., Ltd.<\/a><br \/>Nanjing AIYI Technologies Co., Ltd. is one of the most professional other gas analyzer manufacturers and suppliers in China, specialized in providing high quality products and service. We warmly welcome you to wholesale advanced other gas analyzer at competitive price from our factory.<br \/>Address: Building 12, No.3118 Jiyin Avenue, Jiangning District, Nanjing, Jiangsu, China<br \/>E-mail: sales@autequ.com<br \/>WebSite: <a href=\"https:\/\/www.aiyitec.com\/\">https:\/\/www.aiyitec.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Hey folks, let\u2019s cut to the chase for a sec\u2014if you\u2019re in industrial processing, agriculture, wastewater &hellip; <a title=\"can other gas analyzers detect ammonia\" class=\"hm-read-more\" href=\"http:\/\/www.greatvacuumcooler.com\/blog\/2026\/11\/19\/can-other-gas-analyzers-detect-ammonia-4acf-5e91eb\/\"><span class=\"screen-reader-text\">can other gas analyzers detect ammonia<\/span>Read more<\/a><\/p>\n","protected":false},"author":522,"featured_media":3718,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3681],"class_list":["post-3718","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-other-gas-analyzer-4867-5ebfc5"],"_links":{"self":[{"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/posts\/3718","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/users\/522"}],"replies":[{"embeddable":true,"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/comments?post=3718"}],"version-history":[{"count":0,"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/posts\/3718\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/posts\/3718"}],"wp:attachment":[{"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/media?parent=3718"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/categories?post=3718"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/tags?post=3718"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}