{"id":3660,"date":"2026-11-10T11:51:12","date_gmt":"2026-11-10T03:51:12","guid":{"rendered":"http:\/\/www.greatvacuumcooler.com\/blog\/?p=3660"},"modified":"2026-11-10T11:51:12","modified_gmt":"2026-11-10T03:51:12","slug":"what-kind-of-refrigerant-is-used-in-screw-chillers-47fc-0dda41","status":"publish","type":"post","link":"http:\/\/www.greatvacuumcooler.com\/blog\/2026\/11\/10\/what-kind-of-refrigerant-is-used-in-screw-chillers-47fc-0dda41\/","title":{"rendered":"What kind of refrigerant is used in screw chillers?"},"content":{"rendered":"<p>If you\u2019ve ever had to spec out a screw chiller for a factory, data center, large retail space, or even a brewery, you know the refrigerant is way more than just a \u201cworking fluid\u201d inside the unit. When our team gets calls asking, \u201cWhat refrigerant do you guys use for our screw chillers?\u201d I don\u2019t just rattle off a list of names\u2014 I break it down by use case, local rules, and what actually makes sense for your application, not just the cheapest option available. <a href=\"https:\/\/www.atxks.com\/screw-chillers\/\">Screw Chillers<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.atxks.com\/uploads\/47917\/small\/rotary-screw-chiller0af88.png\"><\/p>\n<p>Let\u2019s start with the basics: screw chillers, unlike smaller window AC units or even packaged rooftop units, are built for heavy loads\u2014think 50 to 2,000 tons of cooling, running 24\/7 sometimes for months on end. That means the refrigerant they need has to hold up to constant pressure, high temperatures, and tough operating conditions, without breaking the bank or breaking environmental rules.<\/p>\n<p>For the longest time, the go-to refrigerant for most mid-sized to large screw chillers was R-134a. It\u2019s still super common for our mid-range screw chillers, and here\u2019s why: it\u2019s non-flammable, pretty stable over long run times, and works well for air-cooled and water-cooled units between like 35\u00b0F and 60\u00b0F supply water, which is exactly what most office buildings, hospitals, and manufacturing lines need. I\u2019ll be honest though\u2014R-134a has been on the phased-out list for a minute now, thanks to its global warming potential (GWP). It clocks in at around 1,430, which means if it leaks, it\u2019s 1,430 times worse for the planet than CO2 over 100 years. That\u2019s why we don\u2019t just stick with R-134a for every project anymore.<\/p>\n<p>Once the EPA\u2019s Montreal Protocol updates kicked in a few years back, we started moving a lot of our new screw chillers over to low-GWP alternatives, and the biggest one we use now is R-513A. This one\u2019s a drop-in replacement for R-134a, which is huge for our customers who are retrofitting old chillers instead of buying new ones. It\u2019s got a GWP of only 573\u2014way lower, and it works in almost the same pressures, hoses, and parts as R-134a, so we don\u2019t have to totally rework the unit or switch out a ton of components. No one wants downtime waiting for custom parts, right? R-513A is also non-flammable (it\u2019s an A1 classification, the safest category for refrigerants) so it\u2019s perfect for spaces where flammable stuff is a no-go, like food processing plants or hospitals with sensitive equipment. The only small downside? It\u2019s slightly less efficient at super low temperatures, but for most standard screw chiller applications, that difference is negligible, and the environmental benefit is way more important these days.<\/p>\n<p>Now, if you\u2019re running a really heavy-duty, high-load application\u2014like a data center that needs super precise cooling, or a large industrial plant that runs 24\/7\u2014you might hear us talk about R-1234ze(E). That one\u2019s got an even lower GWP, around 7, slightly flammable (A2L classification, which means it\u2019s only mildly flammable, and it\u2019s pretty safe if installed correctly). It\u2019s also super efficient, which saves our customers a ton on electricity bills over the life of the chiller. The catch with R-1234ze(E) is that it\u2019s not a drop-in for R-134a or R-513A\u2014so if you\u2019re retrofitting an older unit, you can\u2019t just swap it in without checking compatibility, and if you\u2019re installing new, we have to adjust the system a bit to accommodate its properties. But for new builds or replacements where energy efficiency is the top priority (and local environmental rules are extra strict), it\u2019s the way to go.<\/p>\n<p>Wait, and I can\u2019t forget ammonia\u2014R-717. A lot of industrial customers, like breweries, chemical plants, or cold storage warehouses, swear by ammonia for screw chillers. It\u2019s got a GWP of 0, which is basically unbeatable, and it\u2019s super efficient for really high-load applications. But here\u2019s the thing: ammonia is highly toxic and extremely flammable in high concentrations, so it\u2019s only used in spaces where there\u2019s good ventilation and safety protocols are rock solid. You can\u2019t put an ammonia chiller in a regular office building, that\u2019s a disaster waiting to happen. So we only offer ammonia screw chillers for customers who have the infrastructure and safety teams to handle it, and we work closely with their engineers to make sure everything is set up right.<\/p>\n<p>I get why this all feels overwhelming. If you\u2019re not an HVAC engineer, terms like GWP, A1 classification, and drop-in replacements can sound like gibberish. And let\u2019s be real, price matters a lot too. That\u2019s why when a customer hits us up asking about refrigerant for their screw chiller, the first thing we ask is: where is it going? What\u2019s the load? Are you retrofitting or buying new? What are the local environmental rules? Because a refrigerant that\u2019s perfect for one project is totally wrong for another.<\/p>\n<p>For example, last year we had a customer in Chicago who needed to replace an old R-134a screw chiller for a 100,000 sq ft office building. They were on a tight budget, and local rules were just kicking in that penalize high-GWP refrigerants. We went with R-513A. It worked with their existing piping, cut their GWP by over 60% from their old unit, and the efficiency was almost identical to what they had before. They loved it because they didn\u2019t have to shut down their whole operation for weeks to rework the chiller.<\/p>\n<p>Another customer out in Arizona was building a new data center, so energy efficiency was non-negotiable, and they needed something that could handle the extreme desert heat. We recommended R-1234ze(E) screw chillers. It\u2019s got a super low GWP, is way more efficient than R-134a, and keeps the server room temps perfectly consistent, even when it\u2019s 110\u00b0F outside.<\/p>\n<p>And the brewery out in Milwaukee? They run their chiller for both cooling the beer during fermentation and keeping the warehouse at the right temp year-round. We went with an ammonia screw chiller for them. It\u2019s totally safe in their industrial facility with the ventilation they already have, has zero environmental impact, and saves them thousands a year on energy bills.<\/p>\n<p>A common mistake we see customers make is just going with whatever refrigerant is cheapest right now. But what\u2019s cheap today might get banned in 5 years, leaving you stuck with a chiller you can\u2019t refill or service. That\u2019s why we always stress that you shouldn\u2019t just look at upfront cost\u2014you have to think about the long run: compliance, serviceability, efficiency, and safety.<\/p>\n<p>We also keep a close eye on new refrigerants coming down the pipeline. A lot of companies are testing CO2 (R-744) for screw chillers, especially for low-temperature applications, but right now it\u2019s still pretty niche because it needs super high pressure, so the chillers have to be built extra heavy-duty, which makes them more expensive upfront. We\u2019re waiting for that tech to mature before we offer it widely, but it\u2019s definitely on our radar for future projects.<\/p>\n<p>Another thing to keep in mind is that refrigerant type also affects the service and maintenance of your screw chiller. If you have an A1 refrigerant like R-134a or R-513A, service is straightforward\u2014most local HVAC techs can handle refills and repairs. If you have an A2L like R-1234ze(E), you need technicians who are certified to work with mildly flammable refrigerants, which is standard now, but something to keep in mind when you\u2019re budgeting for service down the line. For ammonia, you need specially trained techs, which is why we only offer ammonia units to customers who already have that expertise.<\/p>\n<p>At the end of the day, the refrigerant for your screw chiller isn\u2019t a one-size-fits-all decision. It depends on your application, location, budget, and long-term goals. We don\u2019t push the most expensive refrigerant or the one that\u2019s easiest for us to install\u2014we find the right fit for your specific needs, so you get a chiller that runs reliably, meets all rules, and doesn\u2019t cost you a fortune to operate.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.atxks.com\/uploads\/47917\/small\/water-cooled-screw-compressord6de7.png\"><\/p>\n<p>If you\u2019re in the market for a screw chiller, or you\u2019re looking to replace an old one and have questions about what refrigerant makes sense for your setup, feel free to reach out to our team for a free consultation. We\u2019ll walk you through all the options, break down the pros and cons for your unique situation, and make sure you end up with a system that works for you, not just the latest trend. Don\u2019t let refrigerant jargon stress you out\u2014we\u2019ve got you.<\/p>\n<p><a href=\"https:\/\/www.atxks.com\/screw-chillers\/\">Screw Chillers<\/a> References:<br \/>\nASHRAE Handbook\u2014HVAC Systems and Equipment, 2021<br \/>\nU.S. Environmental Protection Agency (EPA), Phase-Down of High-GWP refrigerants, 2022<br \/>\nAir-Conditioning, Heating, and Refrigeration Institute (AHRI), Refrigerant Specification Database, 2023<br \/>\nInternational Institute of Ammonia Refrigeration (IIAR), Ammonia Refrigeration Safety Guidelines, 2020<\/p>\n<hr>\n<p><a href=\"https:\/\/www.atxks.com\/\">Kunshan Aotianxin Machinery Co., Ltd.<\/a><br \/>We&#8217;re well-known as one of the most reliable screw chillers manufacturers in China. With abundant experience, our factory offer high quality screw chillers made in China with low price. If you have any enquiry about quotation and free sample, please feel free to email us.<br \/>Address: 550 Shengguang Road, Bacheng Town, Kunshan City, Jiangsu Province<br \/>E-mail: 1516722561@qq.com<br \/>WebSite: <a href=\"https:\/\/www.atxks.com\/\">https:\/\/www.atxks.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019ve ever had to spec out a screw chiller for a factory, data center, large &hellip; <a title=\"What kind of refrigerant is used in screw chillers?\" class=\"hm-read-more\" href=\"http:\/\/www.greatvacuumcooler.com\/blog\/2026\/11\/10\/what-kind-of-refrigerant-is-used-in-screw-chillers-47fc-0dda41\/\"><span class=\"screen-reader-text\">What kind of refrigerant is used in screw chillers?<\/span>Read more<\/a><\/p>\n","protected":false},"author":907,"featured_media":3660,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3623],"class_list":["post-3660","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-screw-chillers-45b9-0e139b"],"_links":{"self":[{"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/posts\/3660","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/users\/907"}],"replies":[{"embeddable":true,"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/comments?post=3660"}],"version-history":[{"count":0,"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/posts\/3660\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/posts\/3660"}],"wp:attachment":[{"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/media?parent=3660"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/categories?post=3660"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.greatvacuumcooler.com\/blog\/wp-json\/wp\/v2\/tags?post=3660"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}