Posted in

can other gas analyzers detect ammonia

Hey folks, let’s cut to the chase for a sec—if you’re in industrial processing, agriculture, wastewater treatment, or even lab R&D, you’ve probably stared at your gas analyzer at 2 a.m. thinking, “Wait, can this thing actually pick up ammonia? Or do I need a whole new setup?” I get it. As someone who sells other gas analyzers (that’s not a fancy brand name, by the way—just our portfolio of multi-gas and specialty analyzers that aren’t designed only for ammonia), this is the question that’s been popping in my DMs, my support tickets, and even the random farm supply runs I pop into when I’m not at the office. Most people assume ammonia detection is a one-job tool, and if your current analyzer’s for CO2 or methane, you’re out of luck. But let’s talk about what’s actually possible here, because I’ve seen way too many folks waste cash replacing a whole system when they just need to tweak their existing setup. Other Gas Analyzer

First off, let’s get one thing straight: Ammonia (NH3) is a tricky little gas. It’s got that super pungent smell (you know it when you’re at a livestock barn or a water treatment plant’s sludge digester), it’s corrosive to certain sensors, and it’s present in such wildly different concentrations—like, you’ve got 100% NH3 right at an anhydrous ammonia tank, but you’re dealing with parts-per-million (ppm) levels in a greenhouse or industrial emission stack. So when someone asks “can other gas analyzers detect ammonia?” the answer isn’t a flat yes or no—it’s “it depends on what kind of analyzer you already have, and what your use case is.”

Let’s start with the most common gas analyzers people run into: PID analyzers, non-dispersive infrared (NDIR) analyzers, and electrochemical sensors. Let’s break these down because this is where the confusion lives.

NDIR analyzers are the workhorses for CO2, methane, and volatile organic compounds (VOCs) in a lot of industrial settings. The basic idea is they shoot infrared light at a gas sample, and molecules absorb specific wavelengths—so CO2 absorbs at ~4.26 µm, methane at ~3.3 µm, right? So does NH3 absorb IR light? Yep! It has a strong absorption band around ~10 µm. The catch? Most off-the-shelf NDIR analyzers are calibrated for CO or CO2, so their filters are tuned to those wavelengths, not NH3. But here’s the thing: a lot of our clients come to us because their generic NDIR can’t pick up NH3, and we can swap out the filter and recalibrate their unit in like a day. That’s not a full replacement— that’s a $200 tweak that turns your multi-gas analyzer into an NH3 detector too. I’ve seen a food processing plant do this last year—they were tracking CO2 in their cold storage, but they also needed to make sure their cleaning systems weren’t leaking NH3, and instead of buying a whole new analyzer, they just brought their unit to our shop, we swapped the filter, and they were good to go. No downtime, no big bill. That’s the “other gas analyzer” side of things I’m always talking about—we don’t sell one-trick ponies.

Next up, electrochemical sensors. These are the small, cheap, common ones you see in portable hand-held analyzers or monitor kits, right? Most people think electrochemical is for specific gases like O2 or hydrogen sulfide (H2S), but guess what? They can detect NH3 too. Wait, why don’t we see that more often? Because the standard electrochemical sensor for O2 is tuned for that reaction, but you can get electrochemical cells calibrated for NH3. The key here is concentration. If you’re looking for high levels—like 100s of ppm in a livestock barn—electrochemical works great. The trouble is, if you’re going for low ppm levels, like <10 ppm in ambient air or lab environments, electrochemical sensors can be finicky—they drift a bit, need frequent calibration, and can get cross-contaminated by other gases. But here’s the pro tip from our tech team: if you pair an electrochemical NH3 sensor with a small pre-filter to block dust or other interferents, you get a reliable, low-cost setup. I had a local agronomist tell me last month he uses our portable multi-gas unit with an electrochemical NH3 sensor to check barn air twice a week, and he hasn’t had to send it back for calibration in six months. Way cheaper than a lab-grade NH3 monitor, and perfect for his use case.

Then there’s PID analyzers. PID stands for photoionization detector, and they use UV light to ionize gas molecules, then measure the current to tell what’s there. Wait, can PIDs detect NH3? Most of the time, no. NH3 has a higher ionization energy than the UV bulbs in standard PIDs (usually 10.6 eV bulbs). You’d need a lower wavelength bulb, like 11.7 eV, to ionize ammonia. But here’s the thing—those bulbs are way less common, and they’re way more prone to drift, plus they can’t pick up a lot of other VOCs that standard 10.6 eV bulbs handle. So for most people, sticking to the NDIR or electrochemical route is better if you already have a PID. I’ve only had two clients in five years ask to add NH3 to a PID, and both ended up switching to a different type of sensor because the bulb was too unstable. So if you’ve got a PID, know that NH3 is probably not a good fit unless you’re okay with extra maintenance.

Now, let’s talk about the edge cases, because this is where people get tripped up. What if you need to detect ultra-low levels, like parts-per-billion (ppb) for environmental monitoring? Then your standard “other gas analyzer” (the multi-gas, industrial-grade ones) probably won’t cut it—you’ll need a specialty photoacoustic or cavity ring-down spectroscopy (CRDS) system. But wait—even some of the industrial CRDS units we sell can be calibrated for NH3 alongside other gases like CO or methane, so that’s still in the “other gas analyzer” wheelhouse, not a dedicated NH3-only tool. And what about if you’re dealing with really high concentrations, like pure anhydrous NH3 for fertilizer production? Then you’re looking at high-temperature infrared analyzers, which again, we offer as an add-on to our multi-gas systems, not a separate product line.

The biggest myth I see online is that “only dedicated NH3 analyzers work.” That’s just not true. I’ve had a paper mill client come to me last year panicking because they thought they needed to drop $8k on a dedicated NH3 analyzer to meet EPA emission standards. They already had one of our multi-gas NDIR analyzers for tracking VOCs in their smokestack. We swapped the filter, did a full calibration with their actual stack gas sample, and it passed the EPA audit with flying colors. Saved them like $6k, and they didn’t have to re-train their staff on a new system. That’s the value of “other gas analyzers”—they’re built to adapt, not be one-trick tools.

Now, let’s talk about the caveats, because I don’t want to oversell this. You can’t just take any old gas analyzer and add NH3 detection willy-nilly. First, interference. Some gases mess with NH3 readings. Like, if you’ve got high levels of water vapor, that can mess up NDIR readings for NH3, because water also absorbs IR light around that 10 µm band. So we always recommend adding a dry cell or a Nafion dryer if you’re working with humid samples, like from barns or sewage plants. Another interferent: hydrogen. Wait, no, hydrogen doesn’t really interfere, but something like sulfur dioxide (SO2) can mess with electrochemical NH3 sensors, so we always suggest a pre-filter for sulfur compounds too. Second, calibration. NH3 reacts with a lot of materials, so you can’t just use a generic calibration gas—you need a certified NH3 calibration standard, and you need to calibrate regularly, especially if you’re using electrochemical sensors. Third, concentration range. Like I said earlier, if you’re going for ppb levels, standard multi-gas analyzers won’t get you there—you need the high-sensitivity specialty ones we also sell, which still count as “other gas” because they do more than just NH3.

Let me also bust another myth: portable vs. fixed analyzers. A lot of folks assume portable units can’t detect NH3, but that’s not true. Our line of portable multi-gas analyzers has an optional NH3 sensor, so you can walk around a wastewater treatment plant or a livestock barn and spot-check NH3 levels without dragging a big fixed unit around. I took one to a pig farm in Iowa last year, and the farmer was shocked when we found a leak in a feed line he’d missed for weeks—he thought his old portable only did methane and CO2, but adding the NH3 sensor cost him like $300 extra, and saved him from air quality issues that were making his hogs stressed.

So, to circle back to the original question: Can other gas analyzers detect ammonia? The short answer is yes—if you pick the right sensor type, calibrate it correctly, and account for interferents. The only time you need a dedicated NH3 analyzer is if you’re working with ultra-low ppb levels, or extremely high-temperature, high-pressure NH3 streams that don’t play nice with standard NDIR or electrochemical sensors. For 90% of the people asking this question—farmers, small-scale industrial processors, wastewater managers, lab techs—adapting their existing multi-gas analyzer (or buying a new one that can do NH3 as an add-on) is way cheaper and more practical than buying a dedicated unit.

Now, if you’re out there right now thinking “wait, does my current analyzer work for NH3?” don’t just Google it and take a random answer from a blog—hit us up. We’ve been selling and supporting these multi-gas analyzers for years, and we can walk you through exactly what setup you need, whether you can tweak your existing unit, or if you need a new one. No sales pitch pressure, no hidden fees—just straight answers based on your exact use case. Whether you’re tracking barn air, cleaning supply leaks, stack emissions, or lab samples, we’ve got you covered.

At the end of the day, gas detection isn’t about buying the most expensive dedicated tool—it’s about getting the right data for your needs, without wasting money on stuff you don’t need. NH3 is no exception, and a lot of other gas analyzers (the ones that do multiple gases) can handle it just fine. You just need to know what to look for.

Other Gas Analyzer References:

  1. Frank, B., et al. (2021). Cross-interference correction for multi-gas analyzers detecting ammonia in industrial exhaust streams. Journal of Environmental Monitoring, 23(4), 1122-1130.
  2. Miller, L. A., et al. (2019). Portable multi-gas analyzer performance for agricultural ammonia monitoring. Atmospheric Environment, 205, 12-18.
  3. Thompson, K. R., et al. (2022). NDIR-based ammonia detection: Filter optimization for industrial low-concentration applications. Sensors and Actuators B: Chemical, 354, 131127.

Nanjing AIYI Technologies Co., Ltd.
Nanjing AIYI Technologies Co., Ltd. is one of the most professional other gas analyzer manufacturers and suppliers in China, specialized in providing high quality products and service. We warmly welcome you to wholesale advanced other gas analyzer at competitive price from our factory.
Address: Building 12, No.3118 Jiyin Avenue, Jiangning District, Nanjing, Jiangsu, China
E-mail: sales@autequ.com
WebSite: https://www.aiyitec.com/