Posted in

How to shape piezoelectric ceramics?

If you’ve ever worked with sensors, ultrasonic cleaners, or even some tiny buzzers in your phone, chances are you’ve interacted with piezoelectric ceramics. But if you’re wondering how those materials actually go from a powdery mix to a precise, functional component—well, that’s the magic that happens right here at our plant, and today I’m breaking down the process like I would for a new customer who just asked, “How do you shape that stuff, anyway?” Piezoelectric Ceramics

First off, let’s get one thing straight: this isn’t just pouring clay into a mold. Piezoelectric ceramics (we call them PZT, short for lead zirconate titanate, the most common formula we use here) are crazy sensitive to even tiny tweaks in every step. Mess up one stage, and the piezo effect—this weird property where voltage turns to mechanical movement and vice versa—vanishes. No buzzers, no ultrasound, no nothing. So shaping them isn’t just about form; it’s about keeping the structure tight, consistent, and ready to polarize later.

Let’s start at the very beginning: the raw powder. You can’t just buy pre-mixed PZT and call it a day. We source high-purity zirconium and titanium oxide, plus lead oxide (don’t worry, we follow all safety rules here) because lead helps crank up the piezo response. First step is milling—we ball-mill those raw materials for like 12 to 24 hours, depending on how fine we need the powder. Finer powder = more uniform final product, so we grind it until it’s almost the size of a red blood cell. Once that’s done, we calcine it: heat the powder to around 800°C in a kiln, which fuses the oxides into the actual PZT compound. This step is make-or-break—heat it too low, and the compound doesn’t form right; too high, and we get big, grainy chunks that ruin the final shape.

Next up, we make the mix moldable. Calcinated PZT is still hard as rock, so we mix it with binders (usually organic stuff like polyvinyl alcohol, or PVA) and a little water to turn it into a thick paste. Binders are super important here—they hold the powder together during shaping, but we burn them out later so they don’t mess with the piezo properties. If you skip the binder, the green (unfired) part would crumble like dry dirt.

Now, the shaping part—this is where we pick the method based on what the customer needs. We don’t use a one-size-fits-all approach, which is why we can handle everything from tiny 1mm discs for medical sensors to big rectangular bars for industrial transducers. Let’s run through the main methods we use, and why we choose each:

  1. Dry pressing: This is our go-to for small, simple shapes—discs, blocks, short bars. We take the dry (well, slightly damp) PZT-binder mix and pour it into a steel mold, then apply 10,000 to 20,000 psi of pressure with a hydraulic press. The pressure squeezes out any air bubbles, which is key—trapped air would cause cracks later when we fire it. The result is a solid green piece, ready to be moved to the kiln. This method is fast and cheap, perfect for high-volume parts like the piezo discs used in cigarette lighters or small buzzers. But it’s only good for simple shapes; if you need something complex, like a curved sensor, dry pressing won’t cut it.

  2. Tape casting: For thin, uniform sheets (think 0.1mm up to 1mm thick, used for piezoelectric sensors or multilayer actuators), tape casting is the way to go. We mix the PZT powder with binders, plasticizers, and solvent to make a slurry, then spread it onto a moving plastic belt with a blade—like a very precise paint applicator. The blade sets the thickness, and the solvent evaporates, leaving a flexible green tape. We can cut this tape into any shape, stack multiple layers for multilayer parts, even pattern it with electrodes before firing. It’s a bit slower than dry pressing, but the consistency is way better for thin, sensitive components. Our medical sensor customers love this because the thin sheets don’t add bulk to their devices.

  3. Extrusion: This is for long, complex shapes—think thin tubes, long rods, or profiles with holes. It’s basically squeezing the PZT-binder mix through a die, like squeezing toothpaste through a tube. The die can be custom-made, so we can make a 1m long tube with a 1mm wall, or a rod with multiple tiny grooves. Once extruded, we cut it to length and let it dry before firing. We use extrusion for our industrial ultrasonic transducers—those long rods that clean industrial parts rely on this method to get the exact diameter and vibration frequency they need.

  4. Wet pressing (casting): For large, thick parts (like blocks for high-power transducers), we use slip casting. We mix the PZT powder with water and a little deflocculant to make a watery slurry, pour it into a porous plaster mold, and let the plaster absorb the water. This forms a solid layer on the mold walls, and once it’s thick enough, we pour out the excess slurry. The green part shrinks a bit when it dries, so we design the mold to account for that. Slip casting is great for big, complex shapes that would be hard to dry press, but it’s slower and has a bit more shrinkage variation.

Wait, and let’s not mention 3D printing? We dabbled in it a couple years back for prototyping custom shapes, like a custom piezo sensor for a robotics client, but for mass production, the other methods are more consistent. 3D printing works for small batches, but the grain structure is a bit less uniform, so we stick to the traditional shaping methods for our main line.

Once we’ve shaped the green parts, the next step is debinding and sintering. Debinding is when we heat the part slowly (over 10 to 20 hours, so the binder doesn’t burn too fast and cause cracks) to burn out all the organic stuff. If we rush this, the binder turns to gas too quick, and blows holes in the part. After debinding, we put the parts in a sintering kiln—this is where the magic really happens. We heat the PZT to around 1200°C, which is below its melting point, so the particles fuse together. During sintering, the part shrinks by like 15-20% in volume, and the tiny gaps between powder particles close up. That’s why we have to design every mold to account for shrinkage—if we make a disc that’s 10mm before sintering, it’ll be ~8mm after, so we add a buffer during shaping.

Once sintering is done, we have a hard, gray ceramic part, but it’s not piezoelectric yet. That’s the poling step, and that’s a whole other blog, but shaping is the foundation. If the sintered part has cracks, uneven grain, or trapped air, it’ll never polarize right, no matter how much voltage we apply during poling.

Now, as a supplier, I’ve seen how this process affects our customers. A client making underwater sonar sensors came to us a year ago because their previous supplier’s parts had too much variation in shape, which messed up their sonar frequency. We switched them to tape-cast discs, and cut their frequency variation from 5% to under 1%. Another customer making piezo buzzers for kids’ toys needed 10 million small discs a month, so we ramped up our dry pressing line to handle that volume, keeping the cost low without sacrificing quality.

Here’s the thing: a lot of suppliers cut corners on shaping to save money. They skip the long milling time, rush the sintering, or use cheap molds that cause uneven parts. But at our facility, every step is calibrated for consistency—we have in-process quality checks at every stage, so if a disc is even 0.05mm off, we reject it before it even gets to sintering. That’s why our parts work reliably, even in harsh environments—whether it’s a sensor in a factory that goes through temperature swings, or a medical device that needs to work for years.

If you’re in the market for piezoelectric components, whether it’s small discs, thin sheets, or custom shapes, don’t just look for the cheapest price. Ask about their shaping process—do they mill the powder? What method do they use for your part size? Do they test for consistency? That’s the stuff that separates a good piezo part from a dud.

We work with all kinds of clients: startups making new wearables, industrial companies building ultrasonic equipment, medical device manufacturers needing precise sensors. If you have a project that needs custom or standard piezoelectric parts, we can tailor the shaping method to fit your needs—whether you need high-volume dry-pressed parts, thin tape-cast sheets, or custom extruded profiles. Just reach out, and we’ll walk you through the best approach for your application.

Ultrasonic Jewelry Cleaner Reference:

  1. Safari, A., & Akdoğan, E. K. (2005). Piezoelectric Ceramics: Principles and Applications. Elsevier.
  2. Jaffe, B., Cook, W. R., & Jaffe, H. (1971). Piezoelectric Ceramics. Academic Press.
  3. Whatmore, R. W. (1986). Piezoelectric materials and devices. Reports on Progress in Physics, 49(8), 1331-1386.

Shenzhen Soner Technology Co., Ltd.
Shenzhen Soner Technology Co., Ltd. is one of the most professional piezoelectric ceramics manufacturers and suppliers in China, specialized in providing high quality customized service. Please feel free to wholesale piezoelectric ceramics for sale here from our factory.
Address: Room 1510, Hubei Baofeng Bldg., No.1054 Baoan South Rd., Luohu District, Shenzhen,Guangdong, China
E-mail: Eldenzhang@sonerc.com
WebSite: https://www.sonerc.com/